Both depth limits, upward-release/downward-lock controls, the actual zero notch and connected extraction qualify a complete original-assembly wood sample.
Original recommended assembly
Retain the qualified original 682142005 thin-kerf wood blade, 7-1/4 in diameter and 5/8 in arbor, rating at least the maximum marked tool speed. No inferred equivalence to current related retail blade cards.
Commissioned power gate
Actual battery and charger must already be qualified under supplement 987000-432 and their complete instructions. No generic ONE+ or new named-pair approval is supplied.
Both depth limits
With the battery removed, lift depth lever to release, set using actual bracket/upper-guard references and push down to lock. Verify both no more than 1/4 in exposure and less than one full tooth.
Zero and width references
With the battery removed, lift bevel lever to release, set zero and push down to lock. Use the zero notch and trial offset; width scale is 1 in right and 4-1/2 in left of the blade.
Connected extraction
With the battery removed, verify the existing adapter fitted to the upper-guard chute with its provided screw; always connect the attachment to a suitable vacuum hose when used.
Stopping and signals
Either-side lock-off precedes trigger; full speed before entry, actual stop before lifting and guard closure before setdown. Three, six and nine flashes have different source meanings; no unconditional reset or powered fault test.
Check before you follow
Identity & documentation.
- Brand
- RYOBI
- Model
- PBLCS302
- Tool type
- Cordless circular saw
- Market
- US PBLCS302, current support manual 999000459 / 11-20-24 REV:01; actual owner match required
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
The current official product support record identifies the exact REV:01 manual. Current 45-degree capacity conflicts and printed illustration-page offsets are retained. No B-suffix hardware duplicate or related-blade equivalence.
Keep the limits in view.
- Exact US PBLCS302 under current-support-returned 999000459 / 11-20-24 REV:01, original qualified recommended 682142005 wood assembly and commissioned supplement 987000-432 power only. Square loose-softwood edge entry with connected existing extraction; no fitting, new power pairing, charging, bevel-capacity reconciliation, rail, plunge, restart/reset or chemical-cleaning recipe.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
RYOBI: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- PBLCS302 supported square owner
Check original assembly, supplement-qualified power, both depth limits, zero reference and connected extraction before a supported wood sample.