Already qualified original assembly, power and native extraction precede the side-position guard check, up-release/down-lock depth controls and one supported square sample.

Original assembly only

Retain the actual correctly installed approved thin-kerf 7-1/4 in wood blade with 5/8 in arbor and permitted speed ABOVE 5000 rpm. Unknown hardware or needed replacement requires exact manufacturer/service clarification; no turn direction.

Prior material history

Known wood-only history or Milwaukee cleaning/testing release is required before wood after metal/masonry use. Visual cleanliness or guard movement alone does not clear that history.

Owner guard check

With the battery removed, use the operator manual side-position retract/release check and immediate spring return, plus clearance at all angles and depths. Do not hybridize the upside-down service-bulletin check.

Depth and square bevel

With the battery removed, depth lever 19 goes UP toward the motor to release and DOWN to lock. Actual through-cut must leave less than a full tooth below stock; separate bevel knob 16 locks zero.

Existing extraction qualification

Actual manufacturer tool-side instructions, already commissioned native hardware/performance and extractor instructions are hard prerequisites. Optional 3001/3002 parts listings are not a fitting recipe or universal hose approval.

Two-hand start and actual stop

Main handle 7 and front 3; lock-off 5 down while pulling trigger 6, full speed before contact, flat shoe and smooth feed. Release/full actual stop/guard cover before removal or setdown; frequent brake misses require service.

Check before you follow

Identity & documentation.

Brand
Milwaukee
Model
2631-20
Tool type
Cordless circular saw
Market
United States, exact 2631-20 matched to current linked d1 03/18
Catalog number
2631-20
Manual revision used
03/18; 961012618-01(B)
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Operator fitting directions versus parts Left Hand Blade Screw remain unresolved: no fitting taught. Owner side-position guard check is not the bulletin upside-down service check. Less-than-full-tooth governs over numeric depth wording; optional adapter existence is not installation approval.

Keep the limits in view.

  • Exact US 2631-20/d1 03/18, already correctly qualified original thin-kerf wood assembly rated ABOVE 5000 rpm, actual commissioned designated M18 power and already documented/qualified native tool-side extraction plus extractor instructions. Missing dust qualification, unknown original assembly or prior nonwood service history is HOLD. No blade-turn/torque/fitting, new adapter or charging setup, repair, rail, interior plunge, nonwood or restart.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Milwaukee: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • 2631-20 qualified owner crosscut

    Keep the unresolved blade-thread conflict outside an existing-owner workflow: qualify original assembly, native extraction and M18 power, check the guard on its side, then set and accept one supported square crosscut.