Qualify the original US wood assembly, commissioned single-pack power and native active dust system before a manageable supported crosscut.
Original assembly and power
Original approved US 165 mm/5/8-inch wood blade rated at least the tool-marked speed (documented 5000/min); already commissioned BL1850B/DC18RC with their complete instructions. No fitting or charging.
Both bevel locks
Battery removed: front bevel lever AND rear clamping screw set and lock zero. Separate angle stopper selects range, not locking; no calibration or high-angle tutorial.
Depth and sight reference
Battery removed: rear depth-guide lever locks actual through-cut with less than a full tooth. Actual front zero reference lies right of the 45-degree reference; no borrowed offset.
Native extraction
Already correctly installed screw-secured nozzle and hose to suitable active Makita extractor; connect/check while saw and extractor isolated. No universal hose diameter or XSH05 wireless procedure.
Automatic indication
Indicator off is high-speed mode, steady green high-torque, flashing green overload alert. These are automatic states, not a manual speed selector or reset permission.
Guard and actual stop
Before each use isolated guard closure/clearance at all angles and depths; normal edge-entry automatic guard, both handles, full speed before contact, actual full stop/coverage then battery removal for acceptance. Repeated failure of quick braking requires service.
Check before you follow
Identity & documentation.
- Brand
- Makita
- Model
- XSH04
- Tool type
- Cordless circular saw
- Market
- US actual XSH04 / supplied 885646-948 XSH04-1 20180130
- Catalog number
- XSH04ZB
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current US product links dated shared manual; XSH05 wireless and country-dependent mounting branches do not transfer. Weight varies with battery and attachments; no performance or kit inference.
Keep the limits in view.
- Actual US XSH04 / supplied 885646-948, original qualified 165 mm/5/8-inch wood assembly rated at least actual marked 5000/min; already commissioned BL1850B/DC18RC with complete instructions and native secured nozzle/hose/active Makita extraction. No XSH05 wireless, country-flange transfer, fitting, charging, cold-pack warm-up, rail, calibration, internal air-blast or reset tutorial.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Makita: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- XSH04 US owner
Check the original 165 mm assembly, both bevel locks, automatic indication and complete native extraction before a supported square crosscut.