A US 165 mm blade-left body with automatic load-selected modes, separate depth and bevel controls and a nozzle that requires its supplied guard lever; a supported zero-degree wood sample stays within the existing qualified assembly.

US original blade assembly

165 mm blade, 5000 rpm no-load speed and actual 15.88 mm US flange drawing agree with the current 5/8 in product arbor. Retain the correct original wood assembly; no regional conversion.

One actually listed battery

The manual lists BL1815N, BL1820, BL1830, BL1840 and BL1850. Use one actual genuine listed pack already commissioned under complete approved system instructions; no charger or kit inference.

Isolated depth and bevel

Remove the battery before setting the rear depth lever and front bevel lever. Use less than a full tooth below actual stock and secure zero bevel; the separate 45/50 stopper only changes range.

Complete nozzle prerequisite

With battery removed, verify an already correctly fitted nozzle with its supplied replacement lower-guard lever and securing screw. The nozzle alone is insufficient; no retrofit tutorial is provided.

Automatic modes and delayed lamps

The illuminated mode indicator means automatically selected high-torque mode. Work lights may illuminate without motor operation and remain on 10–15 seconds; neither lamp proves isolation or standstill.

Secure pack and ordinary cutting

Switch off before pack installation/removal; install fully until the red indicator is hidden. Use both grips, supported retained base and full speed before forward entry; stop fully before withdrawal.

Check before you follow

Identity & documentation.

Brand
Makita
Model
XSH03
Tool type
Cordless circular saw
Market
US XSH03, 885374A945 / XSH03-1; original 15.88 mm assembly, one actual manual-listed commissioned pack
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

885374A945 / XSH03-1, freshly linked by current US XSH03Z page. Broader product battery marketing and optional rail listings do not expand this bounded owner task.

Keep the limits in view.

  • No DHS680 equivalence, expanded battery list, charger commissioning, blade fitting, nozzle retrofit, rail adapter, high-angle calibration, protection-lock reset or fixed brake-time claim.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Makita: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • XSH03 single-battery owner

    Check the original US blade, listed commissioned battery, separate depth and bevel controls and complete nozzle/guard-lever assembly before a guided wood sample.