Qualify the original assembly, actual supply, replacement guard-lever extraction system and separate depth/bevel controls before a supported square sample.
Original matched assembly
Original D-45989 24T wood blade, 185 mm (printed 7¼ inches), actual 5⁄8-inch US assembly already qualified; no fitting, ring/flange substitution or inferred minimum RPM rule.
Actual nameplate power
Actual supply and complete extension/current conditions already qualified. Flyer identifies 10.5 A; no regional voltage or wiring assumption.
Separate depth and bevel
Unplugged rear depth lever locks actual through-cut with less than a full tooth exposed; separate front clamping screw locks 0°, using actual zero sight reference.
Complete dust system
Existing correct replacement lower-guard lever supplied with nozzle, nozzle and securing screw, then suitable active Makita extraction. No partial retrofit or arbitrary hose compatibility.
Lock-off and guard
Unplugged trigger return and free immediate guard/spring closure throughout all angles/depths. Lock-off must not be defeated; known trigger-only starting requires service, not a powered fault test.
Controlled sample acceptance
Both front grip/rear handle, supported retained base, blade clear/full speed/straight feed, trigger release and actual standstill before withdrawal; guard coverage then unplugged cooled inspection.
Check before you follow
Identity & documentation.
- Brand
- Makita
- Model
- HS7600
- Tool type
- Corded circular saw
- Market
- US HS7600 / supplied 885371-941, discontinued current official product
- Catalog number
- HS7600
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current official product is discontinued. Flyer 10.5 A does not establish a universal supply voltage. Strict less-than-full-tooth satisfies both safety and adjustment wording; no invented blade RPM rule. Optional nozzle requires its replacement guard lever and screw, not just a hose.
Keep the limits in view.
- Exact discontinued US HS7600 / supplied 885371-941 match, original qualified D-45989 wood assembly and actual nameplate supply only. Complete already qualified replacement guard lever/nozzle/screw/Makita extraction prerequisite; no hose-only retrofit. Modest square loose-wood sample, no fitting, calibration, brushes, high-angle, plunge, nonwood, rail or powered fault testing. No invented numerical blade-rating rule or brake.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Makita: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- HS7600 original wood owner
Qualify the original blade, actual supply, complete guard-lever dust arrangement and separate depth/bevel locks before a supported square crosscut.