A separate bevel preset and locking lever, upper-guard depth marks and bracket notch qualify a supported square wood sample with the existing documented power and extraction system.

Original assembly

Existing approved 184 mm / 7-1/4 in wood blade, round 5/8 in / 16 mm arbor and blade rating at least 5800 rpm. No fitting or thickness workaround.

Commissioned power

Actual listed FX0111, FX0121, FX0221 or FX0231 pack and applicable FX0411 or FX0421 charger require complete supplied instructions and established pairing; no later-kit or charging tutorial.

Depth notch

With the battery removed, lift the depth lever toward the motor to loosen; align the bracket notch with upper-guard marks, lock and verify less than one full tooth below the work.

Preset versus lock

With the battery removed, the preset knob selects a travel stop; the separate bevel lever locks the actual angle. This owner sample uses zero bevel only.

Existing extraction

With the battery removed, verify the complete qualified upper-guard adapter and provided screw, suitable 32 mm hose and unobstructed airflow; no speculative lower-guard-lever retrofit.

Operation and signals

Two designated handles, body beside the blade line, lock-off then trigger, full speed before entry and actual complete stop before setdown. Rapid overload and slower low-charge flashing are not reset permission.

Check before you follow

Identity & documentation.

Brand
FLEX
Model
FX2141
Tool type
Cordless circular saw
Market
US FX2141 non-R, January 2021 current product-linked manual
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Exact US non-R FX2141 under the current product-linked January 2021 manual, 184 mm blade. Later stacked-kit evidence does not replace its listed commissioned power scope; the product lower-guard-lever listing does not supply a retrofit procedure.

Keep the limits in view.

  • Exact US FX2141 non-R under the January 2021 manual; original qualified wood assembly and already commissioned listed power pair only. No later stacked-kit pooling, charging, guard-lever retrofit, blade fitting, high-angle, calibration, plunge, metal, masonry, reset or brake inference.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

FLEX: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • FX2141 complete square owner

    Qualify the original assembly, documented power pair, depth notch, separate bevel lock and existing extraction before a supported wood sample.