Half-tooth depth, left-edge kerf sighting and required complete extraction define this original-assembly square sample. Conflicting replacement sizing and support artwork are not turned into operating permission.

Exact original assembly

The cover says 184 mm while the replacement paragraph says 178 mm beside 7-1/4 in. This discrepancy is unresolved: retain only the correctly assembled original approved wood blade. No replacement sizing or flange conversion.

Corded isolation

Release the trigger, wait for complete standstill and unplug before settings or inspection. Use actual nameplate supply, not the inconsistent 12 V web field or stray battery-removal sentence.

Half-tooth depth

With the saw unplugged, raise lever 16 to loosen; align depth strap 17 with upper-guard notch 18, then lower the lever to secure. Verify about half a tooth below the actual material and full underside clearance.

Zero and kerf reference

Unplug before setting zero with bevel lever 6 and securing it. Indicator 22 follows the blade’s left inner edge, with kerf to its right; test the actual relationship and guide offset. No calibration recipe.

Required extraction

Before cutting wood, require the suitable complete extraction system. Port 23 uses the intended two screws 24 at upper guard 12; physical hose fit does not certify extractor adequacy.

Grip and complete stop

Use main handle 2 and auxiliary handle 5 with both hands, body beside the blade line and broad base on retained support. Release the trigger and wait for complete standstill before lifting; require guard closure before safe setdown. No SB brake-time claim.

Check before you follow

Identity & documentation.

Brand
DEWALT
Model
DWE575 Type 10
Tool type
Corded circular saw
Market
Canada DWE575 Type 10; exact N786997 10/19 owner scope
Catalog number
DWE575
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Exact current CA product-to-Type10 N786997 bridge; dated manual, not latest universal revision. Keep 178/184 discrepancy, Figure O contradiction, stray battery sentence and 12 V web typo visible. Historical US candidate remains held; one actual body, no regional alias count.

Keep the limits in view.

  • Exact Canadian DWE575 Type 10 matching N786997 10/19; original qualified wood assembly and complete required extraction only. Unresolved 178/184 mm discrepancy excludes blade fitting. No US/Type1/SB equivalence, current kit, calibration, pocket cut, restart, brush or brake-test tutorial. Conflicting Figure O and 12 V web field excluded.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

DEWALT: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • DWE575 CA Type 10 owner

    Use the exact Canadian document scope, half-tooth depth, left-edge kerf reference and mandatory complete extraction without transferring SB features or replacement-size assumptions.