The original GB owner system requires real extraction and a supported clear-blade exit, not only the right diameter.

Original GB assembly

Actual original approved 184 mm/16 mm wood blade, EN 847-1 and rating at least actual marked 5500/min; original hardware qualified, no fitting.

Actual supply

Physical GB 230–240 V configuration and sound qualified supply/extension; fully unwind reels. RCD at most 30 mA is recommended, not universal supply certification.

Native active extraction

Already correct complete two-half spout, qualified direct hose or DWV9000 arrangement, active compliant extractor of approved material-appropriate class and dust mask/respiratory controls.

Depth and zero

Unplugged: raise rear depth lever 16 to loosen, set and lock actual about-half-tooth/less-than-full-tooth depth. Separate front bevel knob 6 secures zero.

Kerf reference

Right zero-degree notch versus left 45-degree notch; indicator represents blade left inner edge and kerf falls right. No universal guide offset.

Controlled finish

Prequalify stable shoe support and both-hand control after blade clears material, then release trigger/full stop before lift. Binding/interruption means immediate OFF and motionless hold until standstill.

Check before you follow

Identity & documentation.

Brand
DeWalt
Model
DWE560
Tool type
Corded circular saw
Market
UK GB Type 1 / actual NB448787 03/26 match
Catalog number
DWE560-GB
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

No DWE550 mounting or DWE560-XE bore transfer. Product Unpowered field rejected. Preserve normal no-contact switching and actual-stop-before-lift together, with immediate-stop binding exception.

Keep the limits in view.

  • Actual UK DWE560-GB Type 1 / NB448787 03/26 and physical supply match. Original approved 184/16 EN 847-1 wood assembly rated at least actual marked 5500/min. Existing complete native active extraction. Normal exit must clear blade while shoe support/two-hand control remain, then OFF/standstill before lift; binding requires immediate OFF/motionless hold. No fitting, regional transfer, rail, interior plunge, high-angle, calibration or repair recipe.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

DEWALT: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • DWE560 GB owner system

    Match the original GB assembly, supply and active extraction, then qualify a square cut whose exit stays supported until the blade clears.