A corded UK 30 mm-bore body with depth lever 24, two bevel bolts and left-edge zero-mark guidance; external extraction must meet the D21 performance at the tool connection.

Current product links blade safety, not the D21 tool manual; exact official manual and UK declaration support the bounded document scope.

Regional blade envelope

Type 3 601 F23 0.0 covers UK 070: 1,400 W, 5,500 rpm, maximum 190 mm blade, 30 mm bore and maximum 2.0 mm body. Other regional 184/16 mm values are not substituted.

Installed extraction

At the tool connection require at least 230 mbar vacuum and 36 L/s flow; recommended 35 mm hose and M-class filter. Adapter only with external extraction, never a dust bag.

Separate locks

With the plug removed, secure depth lever 24 for less than one full tooth below the work; both bevel bolts 6 and 26 must hold the selected zero setting.

Cut reference

Use the left edge of 0° mark 9 with waste right, then verify kerf on scrap. A clamped auxiliary straightedge is not proprietary rail engagement.

Assembly boundary

Correct original blade/flanges/bolt are prerequisites. D21 uses direction ② for both removal and tightening while Figure A shows opposite arrows; seek clarification or service before replacement.

Check before you follow

Identity & documentation.

Brand
Bosch Professional
Model
GKS 190
Tool type
Corded circular saw
Market
UK 0601623070 / 3 601 F23 070, actual 240 V nameplate; document-scoped D21 original assembly
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

D21 19 September 2025 and E52 UK declaration issued 22 August 2025. English bolt direction conflict remains unresolved; no fitting tutorial or invented current revision claim.

Keep the limits in view.

  • No resolution or tutorial for the D21 blade-bolt direction conflict, no regional 16 mm substitution, DIY plug replacement, direct proprietary rail engagement, plunge or nonwood cutting.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Bosch: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • GKS 190 UK owner workflow

    Match UK type 3 601 F23 070 and the D21 document, retain the correctly fitted original assembly, qualify extraction at the tool, then lock depth and both bevel points for a square sample.

  • Replacement blade: qualify every gate

    Build a complete blade-selection record for diameter, bore, speed, material and riving-knife constraints, with exact regional examples and stop outcomes.