Original identified blade, commissioned actual power, source-specific at-tool extraction and independent depth/bevel locks precede one supported square sample.

Original wood blade

The actual original Standard for Wood 2608837685 must be positively identified and qualified for wood: 165 mm/20 mm, body within 0.9–1.8 mm, permitted speed ABOVE 5000 rpm and required EN 847-1 marking. No fitting recipe.

Commissioned power

Actual sound GBA 18V 5.0 Ah and its documented specified listed charger must already be commissioned under complete instructions. No generic family or kit promise; remove the battery fully before all setup.

Depth and bevel

With the battery removed, depth lever 7 controls saw/base separation and must lock after actual through-cut depth with less than a full tooth below stock. Separate single bevel lever 9 sets and locks zero.

Cut marking

For the right-blade non-L body, use the left edge of 0° mark 12 with waste right; 45° mark 11 is separate. Verify actual same-assembly sample and straightedge offset, not L geometry.

Installed extraction

At the tool connection the installed extractor system requires ≥230 mbar AND ≥36 l/s, not separate headline maxima. Recommended nominal 35 mm hose and class M do not alone prove performance.

Start and stop

Use main handle 31 and auxiliary 5, body beside the blade line. Lock-off 2 precedes held switch 1; automatic guard and actual standstill/coverage before setdown. Brake has no numerical time guarantee; ECP is not isolation.

Check before you follow

Identity & documentation.

Brand
Bosch Professional
Model
GKS 18V-57-2
Tool type
Cordless circular saw
Market
United Kingdom, exact right-blade non-L body 3601FC1200
Catalog number
06016C1200
Manual revision used
20.04.2026
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Current exact D1P 20.04.2026 selected. Product 2.8 kg versus manual 2.9 kg without battery remains distinct. Old URL/photo wording is not prior 185 LI or L/GX equivalence; generic FiberCement appendix does not expand wood-only scope.

Keep the limits in view.

  • Exact UK 06016C1200/body 3601FC1200 right-blade non-L under D1P; original positively identified Standard for Wood 2608837685 blade rated ABOVE 5000 rpm, already commissioned actual GBA 18V 5.0 Ah/documented listed charger, active installed extraction ≥230 mbar AND ≥36 l/s at tool. One clamped-straightedge square edge-entry wood sample. No L/GX/old 185 LI equivalence, rail mounting, fitting, charging, interior plunge, hook installation or recovery.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Bosch Professional: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • GKS 18V-57-2 UK owner sample

    Use the exact right-blade D1P controls, original qualified blade, commissioned power and installed 230 mbar/36 l/s extraction for one clamped-straightedge wood sample and complete acceptance.