The TC-GG 30 is a corded glue gun for supported, non-structural craft work. Inspect its cable, nozzle and stand before heating, then use the original adhesive recommended for the actual unit rather than assuming a diameter tolerance from another listing.
Resolve the stick specification
The product page and manual describe the stick diameter differently. Use the actual unit's approved original adhesive; neither entry establishes universal interchangeability.
Controlled application
Heat on a nonflammable support and use controlled trigger pressure. Join the pieces promptly without treating a nominal setting time as a load rating.
Non-invasive care
Unplug, cool and keep moisture out before external cleaning. Do not use solvents, open the housing or improvise a nozzle-changing procedure.
Check before you follow
Identity & documentation.
- Brand
- Einhell
- Model
- TC-GG 30
- Tool type
- Compact hot glue gun
- Market
- Germany · 220–240 V · 50 Hz
- Catalog number
- 4522170 / Ident11016
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- The product page states 11.2 mm while the manual states 11 mm: use the original adhesive approved for the actual unit, not an assumed tolerance.
- The listed maximum melting figure is not the normal 195°C operating temperature.
- No owner nozzle-replacement procedure is provided here; ask manufacturer support for the exact TC-GG 30 procedure before attempting it.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Einhell: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- TC-GG 30 pre-use inspection
Check a cool, unplugged TC-GG 30 for cable, housing, nozzle and support defects before a small household gluing session.
- Store glue tools between seasonal craft sessions
Cool fully, remove Gluey’s NiMH pair for prolonged storage, leave integrated batteries unopened and preserve each tool’s labeled consumables and charging equipment.