The original open-slot H wood blade seats around the retained locking pin; the lever must click and return fully home before a qualified loose-wood cut.
Exact supply and original H identity
Match actual K4MT-03/item3735197/AS21726 and sound120 V60 Hz4 A supply. Original H is the pictured wood plunge blade; actual material, reach, condition and identity must close before use. No invented part number or depth.
Retained-pin native attachment
OFF/full stop/unplug, cool and glove. Lever counterclockwise about150° to unlock click, remove old open-slot accessory while retaining pin; clean pin/shaft and seat all grooves/protrusions. Lever clockwise to locking click AND fully home; check pin secure while isolated, keep both pinch zones clear and never point blade backward.
Fixed setting versus Auto-sense6
Original H softwood row3–6 and medium/maximum initial guidance govern a qualified scrap trial. This project selects a suitable fixed non-6 setting and adjusts while stopped/unplugged. Setting6 starts lower at no load and increases with work feedback; no force or constant-rate claim. OEM also permits no-load speed adjustment.
Complete cut and isolated acceptance
Actual barrel grip/free hand clear, cord/vents and complete moving envelope clear, retained stock clamped and waste independently supported. Qualify actual PPE/dust control without invented port. Project chooses OFF/full stop before withdrawal; OEM expressly requires full stop before setdown. Unplug/cool and inspect both faces, line, separation and support history.
Check before you follow
Identity & documentation.
- Brand
- KOBALT
- Model
- K4MT-03
- Tool type
- Corded oscillating multi-tool
- Market
- United States; actual item3735197 and supplied AS21726 match
- Catalog number
- K4MT-03
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- 120 V AC 60 Hz 4 A actual nameplate and supplied AS21726 match; operating/storage5–40 °C, no battery or electrical conversion.
- Original H is wood, not another model’s wood-and-metal H. No kit, accessory SKU, capacity or universal fit claim.
- Optional pin-removal/STARLOCK route excluded. Setting6 Auto-sense is accurately described but not used for the fixed-setting sample; no native extraction port.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Kobalt: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- K4MT-03 retained-pin project
Complete a visible loose-softwood cut with the original H blade, retained native pin and a qualified fixed setting.