Qualify the exact US corded body and separately identified original wood blade, complete the isolated flange sequence and accept a visible loose-softwood cut.

Selected UPC and supply

Match HE41 item 59510, actual UPC 193175473134 and Rev 26i instructions to the 120 V AC, 60 Hz, 3.5 A nameplate. Other current linked documents are not evidence of identical bodies. Keep original plug and cord intact; no electrical modifications.

Separate original wood blade

Original HERCULES HA23-63 / 70251 explicitly supports softwood and HERCULES, with maximum 20,000 OPM. It is not supplied with this body. Confirm actual identity, condition and usable reach; no broad Universal Fit or nominal depth guarantee.

Removable flange and straight-ahead blade

OFF, full stop and unplug; cool the old accessory and wear gloves. Open the release lever, remove the original flange and old accessory, fully engage blade holes on fitting pins, replace the flange and close the lever. Cutting blades point straight ahead away from the handle. Check retention while isolated; persistent movement requires qualified correction.

Two-hand control and isolated acceptance

Both hands on insulated gripping surfaces with vents and cord clear; slide forward ON and reach intended speed before wood contact. No numbered wood setting is given. Establish actual appropriate PPE and dust controls. This project conservatively stops fully before withdrawal, then unplugs for cooled both-face acceptance. No powered fault or seating test.

Check before you follow

Identity & documentation.

Brand
HERCULES
Model
HE41
Tool type
Corded oscillating multi-tool
Market
United States; actual UPC 193175473134 / Rev 26i match
Catalog number
59510
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Actual UPC 193175473134 / Rev 26i, 120 V AC, 60 Hz, 3.5 A only.
  • Original HA23-63 / 70251 is separately qualified, not an included blade. Actual material, rating, reach and sound condition remain required.
  • No other UPC, universal-fit, spare-part availability, reset-button or lock-mode promise.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

HERCULES: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • HE41 forward-blade project

    Match the selected US UPC, fit a separately qualified original wood blade and complete a supported loose-stock cut.