An 18 V body with opposite closed-hole and open-slot disk routes, plus/minus control and a separately qualified PXC power system.
Two disk routes
With the battery removed, omit disk 14 for the closed-hole accessory; use it for the approved open-slot accessory with its camber toward the tool.
Magnet is temporary
Hold the switch downward and chuck upward, seat the locating pins and maintain engagement while closing the quick-release lever. Check secure attachment before power.
Plus and minus speed control
The slide switch moves forward ON and rearward OFF. Plus increases speed and minus reduces it; the manual gives no numbered wood-cut recipe.
Separate sanding system
The 90 mm triangular pad needs aligned abrasive holes. Larger sanding areas require extraction; the listed adapter 4465163 is not proof of a cutting-dust hood.
Check before you follow
Identity & documentation.
- Brand
- Einhell
- Model
- VARRITO
- Tool type
- Cordless oscillating multi-tool
- Market
- UK / article 4465160 / I-Nr 21043
- Catalog number
- 4465160
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- No charger tutorial, universal adapter or cross-revision equivalence.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Einhell: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- VARRITO washer and first cut
Match the UK 4465160 / 21043 body, distinguish closed-hole from open-slot mounting and finish a visible softwood sample with an isolated acceptance check.