Exact 21011 dry-sanding owner workflow with original washer/screw/key clamping, native rotate-to-latch extraction and deliberate mains isolation.

Magnet plus original screw and washer

Unplug first. With the switch down and holder up, engage the pad recesses on the pins, place original washer 4 camber upward and tighten screw 5 securely with key 7. Remove the key before power.

Rotate-to-latch native extraction

With the tool unplugged, fit attachment 6 at the nose and rotate as illustrated until latched; then fit and clamp the pad. The attachment is not an included vacuum.

Maintained slide and clear cable

Check OFF before connection. Forward slide runs; rearward slide stops. Route the cable away from the back and keep cord and hose clear of the work and grip.

Qualified paper and dry-sanding result

Match native pad and sheet, align extraction holes and satisfy actual vacuum instructions. Sand a clamped known-wood trial, then stop and unplug before accepting the surface and attachment condition.

Check before you follow

Identity & documentation.

Brand
Einhell
Model
TC-MG 250 CE
Tool type
Corded oscillating multi-tool
Market
United Kingdom product bridge / exact article 4465185 / I-Nr. 21011
Catalog number
4465185
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Documentation-based, not hands-on testing.
  • No tool-free pad clamp, included vacuum, invented rate conversion or broad sawing/scraping authorization.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Einhell: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • TC-MG 250 CE corded sanding

    Match the exact corded body, latch its native extraction and secure the pad with the original cambered washer, screw and key before a controlled dry-wood trial.