Qualify the UK corded body and original MM480, lock the native accessory with the lever and complete a visible supported wood sample.
Lever-only native clamping
OFF, full standstill and unplug before handling. Hold upside down, turn Quick Lock counterclockwise fully open, remove the old cooled accessory, clean and engage all pins flush. Turn clockwise fully closed while avoiding the lever/body pinch zone; check secure seating while isolated.
Original blade and UK wood chart
The UK product identifies MM480 and actual manual chart 5 gives its softwood row as 8–10. Positively identify the real original blade and inspect condition and usable reach; neither a kit listing nor a similar outline establishes ownership or suitability.
Actual slide and speed range
Slide forward for ON and backward for OFF. The ten-position dial covers 10,000–21,000 OPM, with documented ranges rather than a guaranteed calibrated intermediate speed. Preset OFF and unplugged; use light feed and repeated passes on the known sample.
UK supply, two hands and actual dust system
Match the actual 220–240 V, 50/60 Hz, 270 W nameplate and unmodified supplied plug. Use both hands with vents clear. Isolate tool and extractor before connections; qualify, operate and check actual task dust controls, without assuming the sanding-port drawing proves saw-blade capture.
Check before you follow
Identity & documentation.
- Brand
- Dremel
- Model
- MM40
- Tool type
- Corded oscillating multi-tool
- Market
- United Kingdom; 220–240 V MM40 matching the linked WEU 2012 manual
- Catalog number
- F013MM40JB
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Exact UK supply/body/document match; one MM40 kit body, not a US equivalent.
- Original MM480 actual identity, condition, material and reach required; no replacement or universal-fit inference.
- No MM20 key/washer, generic battery action or MM35 hand-threaded finish; no cutting capture claimed from the sanding illustration.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Dremel: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- MM40 UK Quick Lock owner
Match the UK 2012-document body and original MM480, use the actual lever clamp and finish a visible loose-wood cut with isolated acceptance.