Complete an original-blade loose-wood cut using isolated press engagement, exact corded controls and independent waste support.

Isolated ejection and press engagement

Switch 0, wait for standstill and unplug. Fully open AutoClic to eject the old accessory; place the replacement depressed centre down/text up, press until audible engagement and check secure seating. Wear change gloves; no added bolt or lever-closing recipe.

Original wood blade and visible route

Positively identify AIZ 32 EPC, 2 609 256 947, and its actual condition and usable reach. Use dry loose clean softwood with foreign material excluded, retained stock clamped and waste independently supported.

Actual corded start and stop

Match supply to the actual nameplate. Hold two insulated grips, keep vents clear and switch reachable; forward I runs and rear 0 stops. Full standstill precedes setdown and unplugging precedes inspection.

Sanding extraction is separate

With tool and extractor isolated, qualify the original Figure C hood, adapter and hose before any sanding. It serves the sanding plate only, not cutting blades. Dry sanding requires suitable operating extraction and heat/fire precautions.

Check before you follow

Identity & documentation.

Brand
Bosch
Model
PMF 250 CES
Tool type
Corded oscillating multi-tool
Market
United Kingdom; 0603102170 / 3 603 A02 170
Catalog number
0603102170
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Starlock only despite AutoClic; no Plus/Max, bolt, adapter or LED transfer.
  • Selected current-linked 84G is dated 2022; no newer sanding speed ceiling or numeric extraction requirements inferred.
  • Actual UK nameplate/supply and original AIZ 32 EPC identity required; no kit, capacity or finish guarantee.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Bosch: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • PMF 250 CES AutoClic owner

    Match the exact UK body and original wood blade, engage it while unplugged and complete a supported cut with isolated acceptance.