Selected 240 V corded body with magnetic positioning and mandatory original clamping bolt plus hex key. E0M governs the exact regional system, not the US GOP40 instructions.
Selected UK power
Match actual 240 V order 0601237071/service 3601B37071 and the supply. E0M uses a qualified 230 V reference table, not a license to relabel the product. Disconnect before setup and inspection.
Magnet plus mechanical clamp
With the plug removed, switch at 0 and cooled accessory handled with gloves, engage the original accessory in the cams. Tighten the original bolt with its hex key until the rounded head lies flat; check retention and remove the key.
Exact PAIZ wood route
The product lists PAIZ 32 APB, 2 608 662 558, and E0M supports its wood application. Verify the actual blade, condition, rating and full reach. Starlock and StarlockPlus are accepted; StarlockMax is not.
Separate controls and sanding gate
Forward I runs and rear 0 stops; no GOP30 worklight. Wood maximum 6 and any lower accessory limit apply. Sanding requires separate exact dry setup, maximum 4 and installed extraction of at least 230 mbar AND 36 L/s at the tool connection.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- GOP 30-28
- Tool type
- Corded oscillating multi-tool
- Market
- Great Britain, selected 240 V order 0601237071
- Catalog number
- GOP 30-28
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Document-based existing-owner scope, not physical certification or a current kit promise.
- No 110 V variant count, US electrical conversion, snap mount or worklight transfer.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- GOP30 UK versus GOP40 US
Choose a complete bolt-and-key UK system or snap-in US system without transferring voltage, controls, blade identity or sanding requirements.