An exact 18 V DC body with a two-stage battery release, OSL/OSP snap-in jaws and an automatic worklight on its simple I/0 switch.

Secondary latch is not isolation

Select OFF and wait for stop, press the battery release and slide forward, then press again and withdraw completely before setup. Partial removal is not isolation.

Snap-in jaws, no accessory screw

With the battery removed, face the accessory model-number side toward the holder and press until the jaws snap. No preliminary release-lever opening is needed; open the lever to eject for removal.

OSL and OSP, not OSM

Use Bosch accessories rated at least 21,000 OPM within the exact OSL/OSP interface scope. Generic application rows do not override the model-specific OSM exclusion.

Automatic lamp and six speed settings

Forward I starts and activates the worklight automatically; rearward 0 stops. The six speed references are approximate; begin the initial plunge at medium speed, not a borrowed numbered recipe.

Check before you follow

Identity & documentation.

Brand
Bosch
Model
GOP18V-28
Tool type
Cordless oscillating multi-tool
Market
United States / exact GOP18V-28 body / GOP18V-28N bare-tool bridge
Catalog number
GOP18V-28N
Product-page service identifier
3601HB6011 (match your tool)
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Documentation-based, not hands-on testing.
  • Existing commissioned listed power only; no OSM, charging tutorial, current kit or old/new sanding-pad equivalence.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Bosch: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • GOP18V-28 US owner setup

    Match the exact US body and listed commissioned power, install rated OSL114 without a mounting screw, then complete and inspect a visible supported wood cut.