Keep the original flange supported during closure, then use two-hand control and qualified dust protection for an inspectable loose-stock cut.
Selected US body and separate blade
Match 19101-B / 59163 / UPC 193175457745 / 21j and actual 120 VAC, 60 Hz, 3 A supply. Exact original HA23-63 / 70251 has separate BAUER, wood and 20,000 OPM evidence; actual identity, rating, condition and reach still govern.
Momentary flange support before closure
OFF, full stop and unplug; cool and handle sharp parts with gloves. Lever forward/open, remove original flange and old blade, seat all matching blade holes on pins, replace flange and hold it momentarily, then lever back/original position. Check no spindle movement while isolated; persistent looseness goes to service.
Two-hand slide-switch cutting
Use both insulated gripping surfaces, clear vents and cord, secure retained stock and independently support waste. Slide forward ON and reach intended speed before contact; dial 1–6 gives no numbered wood recipe. Apply qualified PPE, ventilation and actual checked dust equipment, not an invented native hood.
Isolated acceptance and service boundary
For this chosen project, OFF/full stop before withdrawal and safe setdown, then unplug for cooled both-face acceptance. Abnormal vibration, damaged cord or unreliable clamp/control requires qualified correction, not a powered fit/reset test. Source health restrictions and regular-user medical checks apply; no buyer internal repair or parts-availability promise.
Check before you follow
Identity & documentation.
- Brand
- BAUER
- Model
- 19101-B
- Tool type
- Corded oscillating multi-tool
- Market
- United States; actual UPC 193175457745 / 21j document match
- Catalog number
- 59163
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Actual selected UPC/nameplate/document only; no 56509 or other UPC equivalence.
- HA23-63 / 70251 separately qualified against exact own-product BAUER compatibility, wood and 20,000 OPM statements; not an included or universal blade claim.
- No one-handed marketing transfer, invented trigger/reset mode, extra flange parts or DIY repair.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
BAUER: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- 19101-B flange and wood-cut system
Match the selected US UPC, hold the original flange during closure and accept a controlled loose-softwood cut.