Qualify the existing assembly, actual supply, both-handle support route, separate screw and knob, and active native dust system before a modest square crosscut.
Original assembly boundary
Original 24T TCT 7¼-inch (printed 185 mm), 5⁄8-inch (15.875 mm), body 1.3–1.4 mm and teeth 2–2.1 mm assembly must already be positively qualified; no fitting or current 2.5 mm replacement equivalence.
Qualified actual supply
Actual AC 120 V, 60 Hz, 12 A nameplate and complete documented circuit/extension/GFCI conditions already qualified; no wiring or plug modification tutorial.
Depth locking screw
Unplugged: rear depth locking screw releases the bracket setting and locks it again. Actual through-cut projection must not exceed ¼ inch; the ⅛-inch example is not a universal target.
Zero bevel and notch
Unplugged: separate front bevel knob locks the top-edge indicator at zero. Right edge of front notch is the 0° reference; actual scrap trial qualifies its relationship to the line.
Native active extraction
Existing complete 36725-028 system and suitable active extractor required. Adapter 1½-inch outer diameter is not guaranteed arbitrary hose compatibility; connect/check only with both systems isolated.
Two grips and actual standstill
Front and rear handles, operator left, cut right and motor over retained stock; safety button then held switch/full speed. Full standstill before withdrawal, guard coverage, unplugged cooled acceptance.
Check before you follow
Identity & documentation.
- Brand
- WEN
- Model
- 36725
- Tool type
- Corded circular saw
- Market
- US actual 36725 / supplied 20-page manual match
- Catalog number
- 36725
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Original manual teeth 2–2.1 mm versus current related 36725B card 2.5 mm remains unresolved; no new replacement approval. Motor 4500 RPM and current replacement card rating do not establish an older blade rating. Glove wording is phase-specific, with no powered-operation entanglement.
Keep the limits in view.
- Actual US 36725/nameplate/supplied 20-page document match; already correct original 36725B wood assembly only. Current replacement thickness conflict unresolved, no new part equivalence. Qualified 120 V supply and complete native active extraction required. Modest square loose-wood crosscut only; no fitting, wiring, brush service, plunge, bevel, nonwood, internal cleaning or powered fault trials.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
WEN: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- WEN 36725 square sample
Match the original blade, supply, rear depth screw, front bevel knob and native active extraction before a supported square crosscut.