A documented 160 mm corded owner system with guide wedge, automatic pendulum guard, locked plug-it connector, split depth references and EBQ braking; the task stays no-rail, zero-degree and solid wood.

Original G-revision blade qualification

160 mm diameter, 20 mm hole, EN 847-1 and 9500 rpm capability. G recommends 1.8 mm cutting width and 1.2 mm core; preserve the original correctly wedge-matched assembly rather than selecting a substitute.

Plug-it and isolation

Switch off before connecting or disconnecting the cable. With supply unplugged, fully close and lock the tool-side bayonet; actual supply voltage and frequency must match the nameplate.

No-rail depth and square setting

With supply disconnected, press adjuster 3-1 and use the plain scale, not +FS; actual projection is less than a full tooth. Set zero degrees on an even surface and securely close the angle knob.

Guard and guide wedge

With supply disconnected, check free automatic guard return using only its retractor. A bent wedge or slow/obstructed guard rejects the tool for use; no adjustment or replacement tutorial is provided.

Solid-wood speed and extraction

The documented solid-wood setting is 6. This task uses a suitable mobile extractor and antistatic hose; 27/32 mm or 36 mm is documented, with 36 mm recommended to reduce clogging.

EBQ stopping and electronic protection

Approximate two-second EBQ braking is not a clearance timer and is not an EQ claim. Current or temperature limiting can automatically recover; unplug before inspection or adjustment.

Check before you follow

Identity & documentation.

Brand
Festool
Model
HK 55 EBQ
Tool type
Corded circular saw
Market
EU/UK T-Nr. 204876, G / 2025-01-13 declaration serial range 40000000–49999999; actual nameplate supply
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

719373_G / 2025-01-13. New G-revision article; historical E/2022 article remains held. The same 204876 hardware is counted once.

Keep the limits in view.

  • No E/2022 specification transfer, latest supplied-manual claim, EQ brake transfer, blade replacement, wedge adjustment, rail commissioning, FSK, internal plunge or nonwood task.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Festool: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • HK 55 EBQ G-revision owner

    Qualify the original blade and guide wedge, lock plug-it, read the no-rail depth scale and complete an extracted, supported solid-wood sample.