Exact Type 3 depth and bevel controls, commissioned power and mandatory complete extraction qualify one supported square wood sample; actual standstill governs despite the brake description.
Original Type 3 assembly
Retain correctly installed approved 184 mm / 7-1/4 in wood blade with 5/8 in / 15.9 mm bore and rating at least 6000 rpm. Native washer/O-ring assembly is not a fitting tutorial.
Documented owner power
Actual commissioned listed pack and charger require the complete original or separate Batteries and Chargers instructions. The 4 Ah-or-higher recommendation is for best results, not an absolute compatibility minimum.
Isolated depth and bevel
Remove the battery before using depth lever 13 and strap marks; lock and verify less than a full tooth. Bevel lever 9 loosens counterclockwise and tightens clockwise at zero on scale 10.
Required extraction
With the battery removed, verify the existing complete approved dust port 18. Wood sawing requires a documented compliant vacuum and approved dust mask; hose fit alone does not establish compliance.
Grips and switching
Use main 3 and secondary 4 with body beside the blade line. Lock-off 2 from either side precedes switch 1; no lock-on. No loose-fitting or fingered gloves during operation.
Actual stopping
The manufacturer describes a 1–2 second automatic brake, but actual complete standstill and guard coverage govern withdrawal and side-setdown. No timed clearance or energized brake test.
Check before you follow
Identity & documentation.
- Brand
- CRAFTSMAN
- Model
- CMCS551
- Tool type
- Cordless circular saw
- Market
- US actual Type 3, NA701538 03/25; CMCS551B product is bare-tool configuration
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current US CMCS551B page links multiple types; only actual Type 3 with NA701538 03/25 is admitted here. Original 6000 rpm-or-higher blade, existing complete approved dust port and separate full power instructions remain prerequisites.
Keep the limits in view.
- Actual US CMCS551 Type 3 matching NA701538 03/25 only, original qualified wood assembly and already commissioned listed power system with full separate instructions. Existing complete approved dust port and compliant vacuum mandatory. No Type 1/2 transfer, B hardware duplicate, charging, fitting, track, plunge, calibration, reset or brake-test procedure.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
CRAFTSMAN: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- CMCS551 Type 3 complete owner
Match actual Type 3 identity, original 6000 rpm-or-higher blade, commissioned power, independent settings and mandatory extraction before a supported sample.