Actual original blade approval, exact supply, both bevel locks, native zero mark and parallel guide precede a measured loose-wood strip sample.
Verified original blade
Actual manufacturer-approved original wood blade, diameter 150–160 mm, bore 20 mm, plate at most 1.8 mm, EN 847-1. Above 6160 rpm is a conservative task gate addressing published speed conflict, not presumed factory-blade identity.
Actual supply and isolation
Existing sound GB fused plug and supply matching actual nameplate. Release, wait for standstill and unplug before work; no plug, fuse or cord repair.
Installed extraction
At the tool connection require at least 220 mbar AND 34 l/s (122.4 m³/h). Recommended 35 mm hose and dust class M do not establish performance. Actual Fig B connection and appropriate material filtration must qualify.
Depth and both bevel locks
Unplug. Loosen depth lever 27, move saw relative to base 12, set scale 28 and retighten; actual through-cut with less than full tooth exposed. Set zero with both wing bolts 7 and 14, then secure both.
Plain-model parallel guide
Unplug before setting guide 10 through base 12 with wing bolt 8 and native 0-degree mark 30. Mark 29 is 45 degrees; no CutControl window 9. Same-material sample verifies actual width.
Held trigger and automatic guard
Use insulated grips 3/17, lock-off 1 then HOLD trigger 2; no lock-on. Ordinary edge entry uses automatic lower guard. Actual stop and guard coverage precede setdown; unplug before acceptance.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- PKS 55
- Tool type
- Corded circular saw
- Market
- United Kingdom, plain PKS 55 exact type 3 603 E00 070
- Catalog number
- 0603500070
- Manual revision used
- 22.05.2026
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current F5R selected. Product 5040–6160 rpm versus manual 5600 retained; ABOVE 6160 blade gate is conservative editorial scope plus actual approval, not OEM correction. Product 4.000 kg/manual 3.9 kg without cable, duplicate input/output and differing standards not converted into performance or exposure claims. Plain model has no CutControl or dust box.
Keep the limits in view.
- Exact plain UK PKS 55 order 0603500070/type 3 603 E00 070 and F5R; original manufacturer-approved wood blade rated ABOVE 6160 rpm under conservative editorial conflict gate, actual supply and installed extraction at tool ≥220 mbar AND ≥34 l/s. No A/AF, CutControl, dust box, fitting, rail, metal, plug conversion or reset.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- PKS 55 UK plain-model wood sample
Confirm original blade approval, the conservative speed gate, installed extraction, both bevel locks and native guide reference before a measured loose-wood strip.