The small sprung-head body requires two insulated grips, actual depth qualification, active extraction and a planned fully clear normal exit. Binding/interruption has a separate stop-and-hold rule.
Original wood assembly
Retain the already qualified Precision 2 609 256 C82, 65 mm/15 mm, body at most 1.2 mm and tooth thickness/offset 0.8–2.0 mm, EN 847-1 and blade speed rating strictly above 6400 rpm. No fitting procedure.
Isolated depth check
Unplug before loosening screw 8, setting slider 5 and securing screw 8. Verify actual projection less than one full tooth; nominal material-plus-tooth scale wording is not a guessed offset or full-tooth permission.
Switch and sprung head
Lock-off 1 precedes held switch 2 and also unlocks plunge movement. Raising the tool lets the head return and relock. Use insulated gripping areas 10 and 11; no one-hand inference.
Connected extraction
With the plug removed, adapter 9 enters chip ejector 20 and rotates in the shown direction until it clicks; hose 17 connects to a qualified material-suitable extractor. Active extraction and actual full-path clearance are prerequisites.
Guide and CutControl
With power isolated, secure an auxiliary board and establish the actual base-contact offset on a sample. Window 7 and square mark 19 do not provide a universal kerf or maximum-depth boundary for every setting.
Normal and interrupted finish
Only a qualified complete clear exit permits the documented controlled lift, sprung return and a few more seconds running before OFF, actual standstill and covered setdown. Binding or interruption instead requires OFF and motionless hold until stopped; no moving withdrawal or recovery tutorial.
Check before you follow
Identity & documentation.
- Brand
- Bosch Home & Garden
- Model
- PKS 16 Multi
- Tool type
- Corded compact plunge-head circular saw
- Market
- Switzerland, exact 06033B3000 / 3 603 CB3 000 original-assembly owner
- Catalog number
- 06033B3000
- Manual revision used
- 14.06.2023
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current linked Swiss 8R1 retained. Product 2.600 kg versus manual 1.9 kg remains unresolved; no weight ranking. Unrelated mower PDF in the download list is excluded. No UK plug or AUS/NZ rule transfer.
Keep the limits in view.
- Exact Swiss original Precision C82 wood assembly and qualified actual supply/extraction only. No fitting, electrical repair, internal opening, trapped-tool recovery, tile/metal/plastic, regional pooling or kit promise. Normal full-clear exit differs from binding/interruption stop-and-hold.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- PKS 16 Multi: controlled loose-wood cut
Prepare the exact Swiss original C82 wood assembly, measured depth and active extraction, then distinguish this sprung-head saw’s normal clear-exit return from a binding stop.