The depth button, two bevel locks and configurable speed display define this exact GC owner task. A qualified existing system precedes a supported square wood sample.
Original regional assembly
For type 3601FB5101, the matching table specifies 184–190 mm diameter, 30 mm bore and 1–2 mm body thickness. Retain the qualified original EN 847-1 wood blade rated above 5000 rpm to satisfy the stricter blade-instruction wording; other regional bores are not conversion options.
Known speed configuration
Six levels plus ECO are the basic configuration; app programming can change the number of levels to two through six. A displayed level is not universally the same rpm. Unknown configuration means hold, not assumed factory settings.
Depth and bevel
Remove the battery before adjustment. GC depth button 22 and scale 17 set less than a full tooth below work. Zero bevel requires both lever 5 and wing bolt 15 secured; do not transfer C-only controls.
Cut reference and guide
GC square mark 8 differs from the C mapping. Use a test cut and calibrated actual kerf against a clamped auxiliary straightedge; no direct rail commissioning or assumed offset.
Extraction and status
The freely rotating ejector accepts a 35 mm hose or specified collection box under 7RA. Select suitable connected extraction for this workflow. Battery bars, temperature and overall status are separate; no reset or live cooling tutorial.
Grip and normal stop
Use both insulated handles with the body beside the blade line. Lock-off 1 precedes held trigger 2. Release the trigger and require complete standstill and guard coverage before setdown; isolate before inspection.
Check before you follow
Identity & documentation.
- Brand
- Bosch Professional
- Model
- GKS 18V-68 GC
- Tool type
- Cordless circular saw
- Market
- UK 06016B5171 / type 3601FB5101, exact 7RA owner scope
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current UK product links dated 7RA. This does not assert the latest supplied revision for every owner. GC and C controls, regional bore columns and later-model extraction requirements are not interchangeable.
Keep the limits in view.
- Exact UK 06016B5171 / 3601FB5101 matching 7RA, original qualified wood assembly, already commissioned genuine power and known documented speed configuration only. No rail, app, blade fitting, charging, plunge, protective-reset or unknown reprogrammed operation tutorial.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- GKS 18V-68 GC square sample
Match the UK GC body, known speed configuration and original assembly, then set its depth button and two bevel locks for a supported straightedge sample.