The G body has two bevel locks, depth lever 29 and an 18 V commissioned-system prerequisite. The new D2M extraction minima apply at the tool connection.

Current product links D2M and older instructions. D2M selected; family charging lists do not establish an unidentified exact pair.

Blade envelope

165 mm diameter, 20 mm bore, 1.0–1.7 mm plate and 1.7–2.6 mm cutting width; EN 847-1 and permitted speed at least the maximum marked tool speed. Original correctly installed assembly only.

G-model setup

With the battery removed, clamp lever 29 for less than one full tooth below the work and secure both bevel bolts 8 and 15. G zero mark 10 is not the non-G mark diagram.

Installed extraction

At least 230 mbar and 36 L/s at the tool connection; recommended 35 mm hose and M-class filter. Adapter 28 clicks onto port 16 and is secured by screw 27; external extraction only, no dust bag.

Power and stopping

An already commissioned exact approved battery/charger pair and complete owner instructions are prerequisites. Lock-off 1 then held trigger 18; the run-out brake shortens coasting, but battery removal provides setup isolation.

Ordinary guide scope

A securely clamped straight board guides the base for the square sample. The D2M G/FSN versus generic rail scope distinction is not resolved into a new rail or bevel-rail procedure.

Check before you follow

Identity & documentation.

Brand
Bosch Professional
Model
GKS 18V-57 G
Tool type
Cordless circular saw
Market
UK 06016A2101 / 3601FA2100, G family 3 601 FA2 1.., D2M 2026 existing-owner scope
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

D2M dated 27 March 2026, selected from current product download links. Historical first-rail-plan remains held; this new owner article does not reinterpret rail-specific claims.

Keep the limits in view.

  • Original correctly installed G-model wood assembly and already commissioned exact approved power system only. No charging setup, kit-content promise, blade replacement, proprietary rail or rail-bevel procedure, non-G cut-mark transfer, plunge or nonwood use.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Bosch: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • GKS 18V-57 G square-cut owner

    Match the G body and D2M instructions, qualify the existing battery system and tool-end extraction, then set both bevel locks and verify a supported square sample.