Confirm the exact original diamond/clutch assembly and mandatory oil condition for this use before qualifying the actual supply, depth, right-foot guide and complete sample acceptance.

Exact original assembly

Actual US body and supplied CSW41 manual must match. Retain the original qualified 7-1/4 in diamond-opening combination wood blade, washers, stud and Vari-Torque clutch. Product 5/8 in is not conversion permission; no fitting or clutch adjustment.

Mandatory current-use oil condition

Before each use, the exact unplugged maximum-depth/horizontal-foot check must already have been competently completed with stable support and blade clearance. Oil must not be below bottom housing threads; combined oil-plug/lock-button assembly restored. Unknown oil, contamination, service interval or plug function means HOLD.

Contour depth and zero bevel

With the plug disconnected, read depth at the bottom contour of the depth lever, lock and verify actual through-cut with less than one full tooth below the work. Separate front bevel lever locks zero; no factory calibration or maximum-depth stability adjustment.

Right-foot guided sample

With power disconnected for setup, use the large zero notch and measured scrap-trial offset. The right side of the foot follows a clamped straight 1 in (25 mm) board guide; clamps and independent supports stay outside travel and blade paths.

Supply and dust limits

Actual nameplate supply and cord must qualify; current US product lists 120 V/15 A/5300 rpm. It explicitly has no native dust collection, blower or electric brake. Real ventilation, PPE and environment must qualify, or choose another system when required capture is unavailable.

Full guard range and actual stop

Unplug for checks. Lower guard must move freely, close instantly and clear blade/parts at all angles and depths. Use main and auxiliary handles; full speed before contact, actual full coast-down and guard coverage before setdown. Binding means immediate trigger release and motionless hold, not restart permission.

Check before you follow

Identity & documentation.

Brand
Bosch
Model
CSW41
Tool type
Corded worm-drive circular saw
Market
United States, actual 3601F6D010 body and supplied 1619X08893 09/13 match
Catalog number
060166D011
Manual revision used
09/13
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Retain product 5/8 in versus manual diamond, differing 45° capacities and BL8LB versus WD7LUB/Skil 80111 lubricant naming. No equivalence, replacement recommendation, new oil recipe or current kit promise.

Keep the limits in view.

  • Exact US CSW41 body 3601F6D010 and supplied 1619X08893 09/13 only. Original qualified diamond/clutch assembly and competent completed mandatory oil check for this use; unresolved oil, contamination, first-ten-hour service or plug function means HOLD. No blade/clutch/oil service, conversion, charging, plunge, restart, rail, electrical repair or native extraction invention. Product 5/8 versus manual diamond and BL8LB versus WD7LUB/Skil 80111 remain unresolved.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Bosch: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • CSW41 oil-qualified owner setup

    Complete a modest square sample only after the exact diamond/clutch assembly, mandatory current-use oil condition, supply, support and dust environment qualify.