Qualify the original round-arbor Vari-Torque assembly, actual supply and exposure controls before a supported square sample using the left notch and distinct rear/front levers.
Original assembly and identity
Actual approved 7¼-inch round 5/8-inch wood blade, correctly rated and original Vari-Torque washers/stud already qualified. No standalone numerical blade-rating rule is invented from the product 6200 rpm motor.
Dust and environmental suitability
Product explicitly lists no dust collection, blower or brake; manual establishes no native port. Actual ventilation, appropriate approved respiratory/eye/hearing protection and material/environment suitability required; HOLD where native capture is required but unavailable.
Depth and square-check restoration
Unplugged safe maximum-depth square check uses front bevel zero and secure lock. Then restore rear-lever actual through-cut depth with less than a full tooth and blade/support clearance; no alignment recipe.
Left zero and documented guide
Left notch is 90°, right 45–56° excluded. If using the documented clamped 1-inch/25 mm board guide, actual right side of foot contacts it with verified offset/clearance/support; no mirrored transfer.
Actual start and stop
Main and auxiliary grips, neither obstructing guard; held trigger/full speed before contact. Diagram lock lever is assembly shaft lock, not trigger lock-off. Actual stop/guard coverage before setdown/unplugged acceptance, no timed brake.
Supply and service boundaries
Actual nameplate supply governs; product 120 V/15 A. Matching extension table 12–16 A: 25 ft/14 AWG and 50 ft/12 AWG, longer entries blank. No CSW oil routine or blade/clutch/brush/internal-cleaning recipe.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- CS5
- Tool type
- Corded circular saw
- Market
- US actual CS5 identification and supplied 1619P06013 09/12 match
- Catalog number
- CS5
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Retain actual URL/displayed-part identity check and product45°1-7/8 versus manual1-13/16 capacity difference without synthesis. No drive inference from layout or CS10/CSW transfer.
Keep the limits in view.
- Actual US CS5 / supplied 1619P06013 09/12 and original approved round 5/8-inch Vari-Torque wood assembly/rating only. Actual nameplate supply and substantive ventilation/PPE/environment qualification; HOLD when required native capture is unavailable. No numerical blade-rating rule invented from motor RPM, trigger lock-off, dust port/blower/brake, oil, fitting/clutch, rail/plunge/restart or high-angle capacity.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- CS5 blade-left owner
Match the original Vari-Torque wood assembly, supply and environmental controls, then verify the left zero notch and actual supported cut path without inventing extraction.