A supported square wood sample requires the actual 07/19 match, qualified original Vari-Torque blade assembly and complete CSDCHUTE replacement-lever arrangement before any cut.
Actual revision gate
Physical CS10 and supplied 2610051973 07/19 must match; the current product links 09/12, not this selected operating revision.
Original blade and clutch
Original approved 7¼-inch round 5/8-inch wood assembly rated at least 5600 rpm, correct washers/bolt and Vari-Torque qualification required. Manual tooth table 0.1 in with minimum 0.07 in footnote; plate maximum 0.07 in. No fitting or clutch recipe.
Complete extraction prerequisite
Unplug before connection checks. Entire already-qualified CSDCHUTE must include its required replacement guard lever and suitable active documented 35 mm extraction; absent or uncertain means HOLD, not partial retrofit.
Depth and square check
Unplugged safe maximum-depth zero-bevel square check precedes restoration and locking of actual through-cut depth with less than a full tooth. Rear depth and front bevel levers are separate; no alignment repair.
Sightline and control
Right side of notch is 90°; left angled reference is outside scope. Both main and auxiliary grips, held trigger and full speed before contact; actual full stop and guard coverage before setdown/unplugged acceptance.
Supply and maintenance boundaries
Actual nameplate/supply governs. Exact 120 V 12–16 A extension row lists 25 ft/14 AWG and 50 ft/12 AWG, with no longer-run extrapolation. No CSW oil routine, brake-time or blower-as-extraction inference.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- CS10
- Tool type
- Corded circular saw
- Market
- US; actual physical and supplied 2610051973 07/19 match required
- Catalog number
- CS10
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current product links 09/12; selected manufacturer-hosted 07/19 adds blade and extraction details. Preserve that distinction, product Dust Collection NO versus optional arrangement, and conflicting 10.2/10.3 lb marketing without performance or weight ranking.
Keep the limits in view.
- Actual US CS10 and supplied 2610051973 07/19 match only, not current-linked/latest revision. Original approved round-arbor Vari-Torque wood assembly, actual supply and complete already-qualified CSDCHUTE including replacement guard lever plus active suitable 35 mm extraction. No fitting/clutch, retrofit, oil, rail/plunge/restart, high-angle or electrical repair recipe.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- CS10 07/19 owner
Qualify the actual revision, original Vari-Torque assembly, supply and complete CSDCHUTE system before one supported square wood crosscut.