Qualify the actual Type 1, original wood assembly, listed commissioned power and real dust controls before a modest supported square sample.
Dated original assembly
Actual Type 1/supplied June 2015 match; original approved 140 mm assembly with printed 3/8-inch (10 mm) bore pair. Blade rating at least 6000 RPM AND above actual nameplate, no substitution or fitting.
Commissioned power and temperature
Already commissioned LBXR20/LCS20 under own complete instructions, not current carton promise. Do not use/store tool and pack where temperature may reach 105°F/40°C; damaged or dropped pack/charger means hold.
Separate adjustment knobs
Battery removed: rear depth knob 11 and front bevel knob 10 secure actual through-cut/zero. Less-than-full-tooth safety rule governs over one-tooth wording; no calibration recipe.
Guard and held controls
Isolated guard free/instant at all angles/depths; ordinary automatic operation. Either-side lock-off held while trigger is depressed, then held trigger; no lock-on. Both actual handles required.
Dust without invented hardware
Actual ventilation, proper dust removal, collection wherever possible and suitable NIOSH/OSHA respiratory protection; no source-qualified native port claimed. Required unavailable controls mean HOLD.
Normal check and actual stop
After static checks, normal sound-tool on/off check with guard closed/blade clear/two hands; never powered fault reproduction. Actual full stop/guard coverage then battery removal before acceptance, no brake timer.
Check before you follow
Identity & documentation.
- Brand
- BLACK+DECKER
- Model
- BDCCS20
- Tool type
- Cordless circular saw
- Market
- US physical Type 1 / supplied 90609929 REV01 June 2015
- Catalog number
- BDCCS20
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current product identity is not a current mechanical/manual bridge. Retain printed bore pair and depth wording conflict; strict partial tooth governs. Generic integrated-battery recycling note does not replace model-specific removable-pack instructions.
Keep the limits in view.
- Physical US BDCCS20 Type 1 and supplied 90609929 REV01 June 2015 match only. Original qualified 140 mm wood assembly with printed 3/8-inch (10 mm) bore pair retained, not interchange permission; blade >=6000 RPM AND above actual nameplate. Commissioned LBXR20/LCS20 under own instructions. No current kit/manual bridge, fitting, charging, tune-up, reset, internal battery removal, pocket cut or invented native dust port.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
BLACK+DECKER: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- BDCCS20 dated US owner
Match the actual Type 1 and June 2015 manual, original rated wood assembly and commissioned power before a supported square sample.